1017 3/4 x 3/4 in. Nu-Rail Crossover Fitting

Overview

The 1017 Nu-Rail® Crossover Fitting attaches a 0.75 in. IPS pipe to another 0.75 in. IPS pipe. The most common use of the 1017 is on our 019ALU Crossarm. A listing of sensors commonly used with the 019ALU appears in the Compatibility information.

Read More

Images

Technical Description

The 1017 NU-RAIL® Crossover Fitting connects a vertical 3/4" IPS pipe to a horizontal 3/4" IPS pipe. It typically attaches a sensor with a 3/4” IPS pipe mount to a 019ALU crossarm.

The 1017 has two ovoid segments that are oriented at a 90° angle. Each segment accepts one piece of pipe allowing a vertical pipe to be secured to a horizontal pipe. The horizontal and vertical pipes are secured to the 1017 fitting using screws, which are tightened with an Allen wrench.

Specifications

Dimensions 6.35 x 8,89 x 7.62 cm (2.5 x 3.5 x 3.0 in.)
Weight 136.1 g (0.3 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Sensors

Product Compatible Note
014A
03001-L (retired)
03002
034B
05103
05108-45-L
05305-L
27106T
CSAT3 (retired)
WINDSONIC1
WINDSONIC4

Mounting Equipment

Product Compatible Note
CM202
CM204
CM206

Additional Compatibility Information

Sensors

The 1017 compatible with sensors that have a 0.75 in. IPS pipe mount (1.05 in. OD).

Pipe

The 1017 is compatible with user-supplied pipe that has a 0.75 in. IPS (1.05 in. OD).

Listed Under

Replacement Part for the following products:
Ships with the following: