The NL241 is a Wi-Fi WLAN (wireless local area network) interface that provides connectivity to your datalogger through your existing Wi-Fi network or any available Wi-Fi hotspot. It can either join an existing network or create a network providing a direct link to the datalogger or to a cloud data service, like Campbell Scientic’s Konect. The NL241 can also be used as an access point for directly connecting to the datalogger from any Wi-Fi enabled device.
The NL241 is a wide-operating-temperature and low-power-consumption device, making it ideal for providing Wi-Fi client and access point functionality in demanding and remote applications. The wireless access point feature allows any Wi-Fi device to connect, including your PC, phone, tablet, or even another NL241 or NL240. It can be always on, cycled on and off under program control, or brought up with the touch of a button. Unlike the NL240, the NL241 is a true access point and does not rely on ad hoc networking.
This wireless network link interface is configurable to support a number of different types of connections including PakBus, TCP serial server and client, Modbus/TCP gateway, and Wi-Fi to CS I/O port bridging.
|Material||Aluminum case with black anodized finish|
|Operating Temperature Range||-40° to +70°C|
|CS I/O Port||
|Supported Protocols||IPv4, IPv6, ICMP/Ping, ICMPv6/Ping, TCP/IP, DHCP Client, DHCP Server (in access point mode only), SLAAC, DNS Client, HTTPS Proxy,TLS, Telnet Server, PakBus, Modbus|
|PakBus Router||50 routes supported|
|Modbus Server||Up to 15 concurrent transactions supported|
|Power Source||CS I/O or DC barrel connector (not USB)|
|Supply Voltage||9 to 16 Vdc|
|Embedded Radio Transmitter Approvals||
|Dimensions||16 x 7.3 x 2.54 cm (6.3 x 2.9 x 1 in.)|
|Weight||180.35 g (6.36 oz)|
|Supported Technologies||802.11b/g/n, WPA/WPA2-Personal, WPA/WPA2-Enterprise Security|
|WEP Client Mode||WPA/WPA2-Personal and Enterprise|
|WEP Access Point Mode||WPA2-Personal|
|Transmit Power||7 to 18 dBm (5 to 63 mW)|
|Rx Sensitivity||-97 dBm|
|Access Point Mode||
|Standby||< 1.5 mA|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
|CR1000||OS version 31.08 or greater|
|CR3000||OS version 31.08 or greater|
|CR6||OS version 06.08 or greater|
|CR800||OS version 31.08 or greater|
The NL241 is powered by the datalogger when connecting through the CS I/O port. When connected to the RS-232 port, a field cable (pn 14291) is used to connect the NL241 to an appropriate 12 Vdc power supply.