FAQs Frequently Asked Questions About our Products and Solutions

What items are needed to set up a TDR100 Data Acquisition System?

Some combination of the following items is needed:

• TDR100 Time-Domain Reflectometer (TDR), which ships with the PC-TDR software
• LoggerNet or PC400 software, which allows the user to write CRBasic data acquisition system (DAS) programs
• CR800, CR1000, or CR3000 Measurement and Control Datalogger to run the DAS program
• If ac power is available onsite, a PS100 or PS200 rechargeable power supply plus a 9591 Wall Charger
• If ac power is not available onsite, a BP12/BP24 Battery Pack plus a CH100 or CH200 Charge Controller plus a SP20 20 W Solar Panel
• If more than one coaxial cable/sensor will be monitored, a SDMX50SP Coaxial Multiplexer
  (Note: One multiplexer can handle up to 8 cables, two multiplexers are required for 9 to 15 cables, and three multiplexers are required for 16 to 32 cables.)
• ENCTDR100 TDR System Enclosure, which includes interface cables and has enough space for a battery/regulator, data logger, TDR100, and one SDMX50SP
• User-supplied 50 ohm coaxial cable

For technical information on our products, enter the part number in the search box on our website. 

Similar FAQs

• How can LoggerNet be upgraded to LoggerNet Admin?
• How can a CR1000 or CR3000 interface with a Modbus/TCP device?
• Can one license of LoggerNet Remote be installed on multiple computers in a single network?
• What might cause a COM port violation when trying to connect from a computer to a TDR100 using PC-TDR software?
• What do “serial port open failed” and “permission denied” error messages mean?
• How can data from a TDR100 be downloaded to a laptop when only a USB port is available?
• When using the TDR100 to measure slope stability or rock deformation, what are the input values for PC-TDR?