Hi All,
We have a CR1000 based solar powered weather station at a remote location , This station forwards data to our server at hourly intervals.
The communications for the CR1000 is via a LAN and wireless communications radio link .
The communication link is powered from a seperate power supply which is also solar powered and isolated from the CR1000 power.
What I wish to do is log the voltage on the secondary power supply for the communications ( I am already doing this for the Weather station PSU).
which would be the best way to achieve this , any ideas would be appreciated.
Regards
VDIV10:1 With the voltage divider, you can read up to 50VDC on the CR1000.
Also connect the ground connections between the two power supplies if not using a common ground already.
This post is under review.
By downgrading the OS to 32.05, I was able to recover my CR800. (really the earlier revision were very accessible, simply had to do search on the site). So, is it possible to stop the CR800 from crashing?